– No-Touch Arc Strikes Arc Pig HF Inline Starter/Stabilizer Offers

I believe at this point you are looking for merchandise, which means you tend to be around the right blog site. Today you are reading through No-Touch Arc Strikes Arc Pig HF Inline Starter/Stabilizer submit. In addition to I hope you’ll find helpful data throughout below prior to obtain product. Currently I want to talk about No-Touch Arc Strikes Arc Pig HF Inline Starter/Stabilizer. Small data that No-Touch Arc Strikes Arc Pig HF Inline Starter/Stabilizer item manufactured by Arc Pig business.

The No-Touch Arc Strikes Arc Pig HF Inline Starter/Stabilizer Information:

We’re on vacation through the 4th. Check back later. Also check out our review from Mr TIG at https://youtu.be/DmNMVdmNIU0

The Arc Pig has been on the market four years, and no Arc Pig warranty claim has ever been denied for any reason.

Arc Pig is the ultimate welder’s indulgence.

Add an Arc Pig to your stick or TIG welder to eliminate scratch starts and maintain your arc, even with 60 HZ AC TIG. The Arc Pig provides no-touch ignition and continuous-fire HF.

The Arc Pig does not control heat, so for long TIG beads on aluminum, you may need to preheat the workpiece, or clamp it to a heat sink.

To operate, place electrode in weld position and press the trigger. The Pig will establish a pilot arc, and with most welders your main arc will ignite instantly. Otherwise move the electrode in slowly until the arc ignites.

HF sparks feel like static electricity. If you grip them firmly you cannot feel them, but if they jump through the air to your skin they are annoying.

The Pig wires into your weld cables (no wall plug) and is designed to be dragged and dangled. Or you can strap it down with long tie-wraps.

8-ft trigger included, or make your own (up to 25 Ft.)

Your first installation should take half an hour. Your tenth will take five minutes.

The Arc Pig is transferable between welders, and requires no wall plug. It draws its power from your weld cables.

Maximum current is 250 A at 60% duty, 200 A at 100% duty.

The Arc Pig works with any TIG or stick welder, AC or DC, EN or EP, up to 60Hz.

The Arc Pig is particularly effective for sheet metal, since arc maintenance is more difficult with low power.

For TIG, the Arc Pig eliminates tungsten contamination, tames hot starts, and lets you weld aluminum with any 60-Hz AC buzz box or truck welder.

To read more with regards to No-Touch Arc Strikes Arc Pig HF Inline Starter/Stabilizer price in addition to critiques, it is possible to press THIS LINK . Lets hope this write-up will let you to take into account in getting associated with No-Touch Arc Strikes Arc Pig HF Inline Starter/Stabilizer merchandise. Or perhaps can be of which with this post someone to discover different item that is identical using No-Touch Arc Strikes Arc Pig HF Inline Starter/Stabilizer or even superior.

Listed below are some that photos associated with No-Touch Arc Strikes Arc Pig HF Inline Starter/Stabilizer:

The No-Touch Arc Strikes Arc Pig HF Inline Starter/Stabilizer Price :

Check Current Price

After you study this particular No-Touch Arc Strikes Arc Pig HF Inline Starter/Stabilizer, we expect this No-Touch Arc Strikes Arc Pig HF Inline Starter/Stabilizer product is usually fit with you. If you believe a person however need to discover merchandise other than No-Touch Arc Strikes Arc Pig HF Inline Starter/Stabilizer, you are able to check out inside every group or perhaps use research pack on this blog site. After that in case you are confident to purchase No-Touch Arc Strikes Arc Pig HF Inline Starter/Stabilizer, you need to press BUY BUTTON under.

Buy Now!

Buy Now